Steam Boiler
Showing all 4 results
-
Steam Boiler
Biomass Fuel Steam Generator
The products are produced in strict accordance with the standard specifications, strength calculation and standard process flow of B-class boilers. The steel plate with the thickness of 24 mm is inspected by magnetic power in the welding seam to ensure the quality of welding process. The weight of the furnace body is more than 2 times heavier than that of the same model on the market.
Forced circulation structure, fast water flow speed, high heat transfer efficiency, effectively reduce the scale of the furnace.
Equipped with ADINA independent floor type control cabinet, full touch screen controller, control system with Internet of Things remote monitoring function, to achieve mobile APP control, one-click operation, five-speed fire size adjustable fire; Safe, simple and flexible, the induced draft fan is controlled by the inverter and can be adjusted according to the steam load.
Built-in energy saver and external waste heat recovery, double absorption of flue gas heat, more energy saving steam production speed, only 4-5 minutes after the normal fuel can be raised to 0.4mpa.
Special large furnace chamber design, fuel applicability is wide, can burn wood strips, wood chips and waste materials and other fuels. The high temperature flue gas flows in the large channel, the cleaning is simple, and the multi-directional cleaning overhaul is configured to ensure that there is no dead Angle in the later cleaning maintenance.
The bottom left and right two collector access port is convenient to observe the scale or impurity deposition in the water pipe wall of the furnace at any time, early detection early prevention of scale deposition, to avoid the occurrence of pipe explosion, this type of biomass steam generator is used to replace the coal-fired boiler within 20 tons, old inefficient biomass boiler, but also the best product to do energy management services.
SKU: n/a -
Steam Boiler
INDUSTRIAL BIOMASS BOILER
• The thermal efficiency of the boiler is greater than 82%, which is higher than the national standard requirement.
• After the water circulation loop is simplified, the water circulation flow resistance is reduced, and the flow velocity in the riser pipe is increased; for the hot water boiler, the left and right water walls with large water circulation flow resistance are equipped with backwater jetting devices. The reliability of the water circulation is improved, and the safe and stable operation of the boiler is ensured.
• Arrange enough heating surface, so that the heat released by fuel combustion can be fully absorbed by the heating surface and then transferred to the working medium, and the exhaust gas temperature is lower than 160˜.
• Reasonably arrange the front and rear arches to increase the furnace temperature and at the same time strengthen the disturbance of the flue gas in the high temperature zone, reducing the loss of chemical incomplete combustion and the loss of fly ash.SKU: n/a -
Steam Boiler
INDUSTRIAL MULTI- FIRED BOILER
• The thermal efficiency of the boiler is greater than 82%, which is higher than the national standard requirement.
• After the water circulation loop is simplified, the water circulation flow resistance is reduced, and the flow velocity in the riser pipe is increased; for the hot water boiler, the left and right water walls with large water circulation flow resistance are equipped with backwater jetting devices. The reliability of the water circulation is improved, and the safe and stable operation of the boiler is ensured.
• Arrange enough heating surface, so that the heat released by fuel combustion can be fully absorbed by the heating surface and then transferred to the working medium, and the exhaust gas temperature is lower than 160℃.
• Reasonably arrange the front and rear arches to increase the furnace temperature and at the same time strengthen the disturbance of the flue gas in the high temperature zone, reducing the loss of chemical incomplete combustion and the loss of fly ash.SKU: n/a -
Steam Boiler
INDUSTRIAL COAL BOILER
• The thermal efficiency of the boiler is greater than 82%, which is higher than the national standard requirement.
• After the water circulation loop is simplified, the water circulation flow resistance is reduced, and the flow velocity in the riser pipe is increased; for the hot water boiler, the left and right water walls with large water circulation flow resistance are equipped with backwater jetting devices. The reliability of the water circulation is improved, and the safe and stable operation of the boiler is ensured.
• Arrange enough heating surface, so that the heat released by fuel combustion can be fully absorbed by the heating surface and then transferred to the working medium, and the exhaust gas temperature is lower than 160℃.
• Reasonably arrange the front and rear arches to increase the furnace temperature and at the same time strengthen the disturbance of the flue gas in the high temperature zone, reducing the loss of chemical incomplete combustion and the loss of fly ash.SKU: n/a